MAX6838XSD1+T Overview
There are 4 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find SC-82A, SOT-343 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 1.2V supply voltages. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 4 pins on IC management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 550mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.6V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 16μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX6838, the base PMIC number. To operate this power management, you will need at least 0.4/3.3V volts of power.
MAX6838XSD1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6838XSD1+T Applications
There are a lot of Maxim Integrated MAX6838XSD1+T Voltage Supervisors applications.
- Medical-specific isolation transformer
- Electric heating appliances
- Analog circuit
- Consumer electronics
- Power distribution systems of ICU
- Display equipment
- Sensitive sensors
- Electronics installed in the vehicle
- Utility meter
- Power communication system
