MAX6832FXRD0+T Overview
A total of 3 terminals are used to mount this power management. Power management is packaged in a Strip way. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes SC functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. When 1.2V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 3 pins on the board. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 550mV volts. This IC power should be powered by no more than 3.6V volts of supply voltage (Vsup). For this power management, there is an 16μA volt supply current. The voltage supervisor requires a power source of 0.4/3.3V volts in order to work correctly.
MAX6832FXRD0+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6832FXRD0+T Applications
There are a lot of Maxim Integrated MAX6832FXRD0+T Voltage Supervisors applications.
- Radar
- FPGA design
- Radio
- Transformer load monitoring equipment
- Electric heating appliances
- Kitchen appliances
- Microprocessor system
- Detection of phase loss
- Detection of phase sequence
- Military communications
