MAX6830ZGUT+T Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. A series of 2 channels can be found on this supervisor. Please find attached SOT-23-6 functions for your reference in this IC power. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. The package peak reflow temperature is specified to be 260. Manage ics operate at 3.6V supply voltages. Power ics operate at 2 supply voltages. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 6 pins on power management. 6 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 10μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6830, the base power ics number.
MAX6830ZGUT+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.2V
10μA operating supply current
MAX6830ZGUT+T Applications
There are a lot of Maxim Integrated MAX6830ZGUT+T Voltage Supervisors applications.
- Consumer electronics
- Network equipment
- Radio
- Satellite navigation
- Automotive permanent magnet synchronous motors
- Power communication system
- WiFi router
- Electrical fire monitoring system
- Functional modules
- Precision measurement
