MAX6825YUK+ Overview
It is mounted through 5 terminals on the power management. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. 5 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 30μA.
MAX6825YUK+ Features
Minimum supply voltage of 1.2V
MAX6825YUK+ Applications
There are a lot of Maxim Integrated MAX6825YUK+ Voltage Supervisors applications.
- Smartphones
- Sensitive sensors
- Digitally controlled LDO regulators circuit
- Power distribution systems of operating room
- Important electronics for automotive protection
- Important electronics for automotive safety
- Military communications
- Leakage protection
- Efficient information transmission
- Detection of phase loss
