MAX6822WUK+T Overview
It is mounted through 5 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1.8V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 5 pins on power management. 5 pins make up the power management. Supply voltage (Vsup) should be at least 1V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~125°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. Supplied with a operating current of 10μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6822, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6822WUK+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MAX6822WUK+T Applications
There are a lot of Maxim Integrated MAX6822WUK+T Voltage Supervisors applications.
- Stable power system
- Electronics installed in the vehicle
- Detection of phase sequence
- Low voltage/high power - AI, GPU
- Microcontroller system
- Transformer load monitoring equipment
- Insulation fault location system
- Battery cars
- Precision measurement
- Fire equipment power monitoring system
