MAX6804US26D3+T Overview
Power management is mounted through 4 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes TO-253-4, TO-253AA functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 4 pins on the board. The pins of the power management system count 4. It is recommended that Vsup should not be less than 700mV for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supervisor's supply current is specified to 5μA. A similar IC managements number of the manufacturer can always be found by using MAX6804, the base power ics number.
MAX6804US26D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
5μA operating supply current
MAX6804US26D3+T Applications
There are a lot of Maxim Integrated MAX6804US26D3+T Voltage Supervisors applications.
- Solar power charger
- Medical-specific isolation transformer
- Electronics installed in the vehicle
- Leakage current detection
- Kitchen appliances
- Microcontroller system
- DVR
- DSP
- Network equipment
- Utility meter
