MAX6803US28D3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes TO-253-4 functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 5V. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 4 pins on the board. There are 4 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. For this power management, there is an 5μA volt supply current.
MAX6803US28D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
5μA operating supply current
MAX6803US28D3+T Applications
There are a lot of Maxim Integrated MAX6803US28D3+T Voltage Supervisors applications.
- Radio
- Network equipment
- Detection of phase imbalance
- Electric heating appliances
- FPGA design
- Magnetic resonance imaging
- emergency room
- Transformer load monitoring equipment
- DC stabilized power supply module
- Electrical fire monitoring system
