Name: MAX6801UR46D1+T
Brand: Maxim Integrated
SKU: MAX6801UR46D1+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-236-3, SC-59, SOT-23-3
Number of Pins	3
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	3
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	320mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.95mm
Base Part Number	MAX6801
Output	Push-Pull, Totem Pole
Pin Count	3
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	700mV
Operating Supply Current	5μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	4.63V
Number of Voltages Monitored	1
Reset Timeout	1ms Minimum
Min Reset Threshold Voltage	4.547V
Max Reset Threshold Voltage	4.713V
Threshold Voltage	+4.63V
Undervoltage Threshold	4.547V
Overvoltage Threshold	4.713V
Length	2.92mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX6801UR46D1+T Product Details

MAX6801UR46D1+T Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 5V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. The pins of the power management system count 3. A voltage (Vsup) that doesn't fall below 700mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 5μA. To find similar IC managements from the manufacturer, you can always search by MAX6801.