MAX6801UR26D2+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 3 pins on power management. 3 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 700mV. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 5μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6801, the base power ics number.
MAX6801UR26D2+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
5μA operating supply current
MAX6801UR26D2+T Applications
There are a lot of Maxim Integrated MAX6801UR26D2+T Voltage Supervisors applications.
- Battery-powered equipment
- WiFi router
- Leakage protection
- Medical-specific isolation transformer
- Battery cars
- External alarm
- Embedded computing
- Solar power charger
- Utility meter
- Low voltage/high power - AI, GPU
