MAX6800UR46D3+T Overview
There are 3 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 5V volt supply. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 3 pins on the board. There are 3 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supervisor's supply current is specified to 5μA. A similar IC managements number of the manufacturer can always be found by using MAX6800, the base power ics number.
MAX6800UR46D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
5μA operating supply current
MAX6800UR46D3+T Applications
There are a lot of Maxim Integrated MAX6800UR46D3+T Voltage Supervisors applications.
- Fire equipment power monitoring system
- Detection of phase loss
- Electric heating appliances
- Medical-specific isolation transformer
- Digitally controlled LDO regulators circuit
- Computer applications
- Precision measurement
- Urban rail transit weak current power monitoring
- Smartphones
- Dash board
