MAX6800UR29D2+T Overview
It is mounted through 3 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 5V supply voltages. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. Power managment ic pin count is 3. IC management can only work with a supply voltage of 700mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 5μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6800, which is the base power ics number.
MAX6800UR29D2+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
5μA operating supply current
MAX6800UR29D2+T Applications
There are a lot of Maxim Integrated MAX6800UR29D2+T Voltage Supervisors applications.
- WiFi router
- Functional modules
- Insulation fault location system
- Satellite navigation
- Detection of phase loss
- Consumer electronics
- Sensitive sensors
- Refrigeration
- Telecommunications equipment
- DVR
