MAX6796TPZD2+ Overview
A total of 20 terminals are used to mount this power management. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are 20-WQFN Exposed Pad functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Regulator/Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 14V volt supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. The power management belongs to the Automotive Circuits subcategory. Power management has a total of 20 pins. 20 pins make up the power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using MAX6796, the base power ics number.
MAX6796TPZD2+ Features
Regulator/Supervisor type
MAX6796TPZD2+ Applications
There are a lot of Maxim Integrated MAX6796TPZD2+ Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Automotive permanent magnet synchronous motors
- Power distribution systems of ICU
- WiFi router
- Battery cars
- Network equipment
- Low voltage/high power - AI, GPU
- Detection of phase loss
- Precision measurement
- Insulation fault location system
