MAX6762TATED3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. There are 2 channels on this power managment ic that can be found in a series. Please find attached 8-WDFN Exposed Pad functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. When 2 is applied to the power ic, it conducts. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 8 pins on IC management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. The power management's supply current is 13μA. It is always advisable to use MAX6762, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6762TATED3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
13μA operating supply current
MAX6762TATED3+T Applications
There are a lot of Maxim Integrated MAX6762TATED3+T Voltage Supervisors applications.
- Important electronics for automotive safety
- Power distribution systems of CCU
- Digitally controlled LDO regulators circuit
- Military communications
- Consumer electronics
- Detection of phase sequence
- Radar
- Detection of phase loss
- Battery-powered equipment
- Personal computers
