MAX6761TATWD3+T Overview
A total of 8 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. There are 2 channels on this power managment ic that can be found in a series. Please refer to power management for 8-WDFN Exposed Pad functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3.6V supply voltages. Power management conducts at a voltage of 2. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. There are 8 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 13μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6761, the base power ics number.
MAX6761TATWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
13μA operating supply current
MAX6761TATWD3+T Applications
There are a lot of Maxim Integrated MAX6761TATWD3+T Voltage Supervisors applications.
- Display equipment
- Embedded computing
- Power distribution systems of ICU
- Electric heating appliances
- FPGA design
- Electrical fire monitoring system
- Electronics installed in the vehicle
- Refrigeration
- Transformer load monitoring equipment
- Battery-powered equipment
