MAX6754UKZD0+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a SC-74A, SOT-753 package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 3.6V volt supply. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supply current of the power management is 13μA. A similar IC managements number of the manufacturer can always be found by using MAX6754, the base power ics number.
MAX6754UKZD0+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current
MAX6754UKZD0+T Applications
There are a lot of Maxim Integrated MAX6754UKZD0+T Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Leakage current detection
- Embedded computing
- Telecommunications equipment
- Fire equipment power monitoring system
- Power distribution systems of operating room
- Automotive permanent magnet synchronous motors
- Military communications
- Urban rail transit weak current power monitoring
- Utility meter
