MAX6754UKLD3+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 3.6V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. This power management system has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~125°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 13μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6754, which is the base power ics number.
MAX6754UKLD3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current
MAX6754UKLD3+T Applications
There are a lot of Maxim Integrated MAX6754UKLD3+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- DVR
- Smartphones
- Microprocessor system
- Power distribution systems of CCU
- Electronics installed in the vehicle
- Telecommunications equipment
- Consumer electronics
- Detection of phase imbalance
- Transformer load monitoring equipment
