MAX6736XKWGD3+T Overview
It is mounted through 5 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a 5-TSSOP, SC-70-5, SOT-353 package. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 1.8V supply voltages. Power management conducts at a voltage of 2. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supply current of the power management is 10μA. You can always use MAX6736, the base supervisor number, to search for similar PMICs of the manufacturer. It requires 1.5/5V watts of power to operate this voltage supervisor.
MAX6736XKWGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
10μA operating supply current
MAX6736XKWGD3+T Applications
There are a lot of Maxim Integrated MAX6736XKWGD3+T Voltage Supervisors applications.
- Leakage protection
- Precision measurement
- Automotive permanent magnet synchronous motors
- DC stabilized power supply module
- WiFi router
- Dash board
- Important electronics for automotive safety
- Network equipment
- Transformer load monitoring equipment
- Detection of phase loss
