MAX6735KATGD3+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 3 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SOT-23-8 functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 3 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 8. Power managment ic pin count is 8. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 4μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6735, which is the base power ics number. The power management must be powered by 1/5V volts to function properly.
MAX6735KATGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
4μA operating supply current
MAX6735KATGD3+T Applications
There are a lot of Maxim Integrated MAX6735KATGD3+T Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Cloud computing
- Dash board
- Precision measurement
- Smart meter
- Detection of phase sequence
- Power distribution systems of CCU
- DVR
- Network equipment
- Detection of phase imbalance
