MAX6735KASHD3+ Overview
A total of 8 terminals are used to mount this power management. Please refer to power management for SOT-23-8 functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. A supply voltage of 3 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It requires 1/5V watts of power to operate this voltage supervisor. Voltage supervisor can work with a supply temperature of 39μA at the most.
MAX6735KASHD3+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
MAX6735KASHD3+ Applications
There are a lot of Maxim Integrated MAX6735KASHD3+ Voltage Supervisors applications.
- Set top box
- Military communications
- Computer applications
- Power distribution systems of operating room
- Battery cars
- Satellite navigation
- Fire equipment power monitoring system
- Smart meter
- Automotive power systems
- Automotive permanent magnet synchronous motors
