MAX6734AKAVDD3+T Overview
There are 8 terminals connected to this power management, which makes it easy to mount. A Strip package is used to package the power management. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a SOT-23-8 package. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 8 pins on the board. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. It is estimated that the voltage supervisor's supply current is 15μA. It requires 1/5V watts of power to operate this voltage supervisor.
MAX6734AKAVDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6734AKAVDD3+T Applications
There are a lot of Maxim Integrated MAX6734AKAVDD3+T Voltage Supervisors applications.
- Automotive power systems
- Transformer load monitoring equipment
- Microcontroller system
- Urban rail transit weak current power monitoring
- Leakage protection
- Satellite navigation
- Medical-specific isolation transformer
- Network equipment
- Radio
- Electronics installed in the vehicle
