MAX6734AKASYD3+ Overview
A total of 8 terminals are used to mount this power management. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes SOT-23-8 functions for your convenience. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. When 3 is applied to the power ic, it conducts. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. There are 8 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. It requires 1/5V watts of power to operate this voltage supervisor.
MAX6734AKASYD3+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
MAX6734AKASYD3+ Applications
There are a lot of Maxim Integrated MAX6734AKASYD3+ Voltage Supervisors applications.
- Medical-specific isolation transformer
- Leakage current detection
- Radio
- Medical-specific insulation monitor
- Electronics installed in the vehicle
- Digitally controlled LDO regulators circuit
- Power communication system
- FPGA design
- Consumer electronics
- Microcontroller system
