MAX6734AKALTD3+T Overview
A total of 8 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SOT-23-8 functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. Power ics operate at 3 supply voltages. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. It is recommended that Vsup should not be less than 800mV for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX6734A, the base power ics number. To operate this power management, you will need at least 1/5V volts of power.
MAX6734AKALTD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6734AKALTD3+T Applications
There are a lot of Maxim Integrated MAX6734AKALTD3+T Voltage Supervisors applications.
- Utility meter
- DC stabilized power supply module
- Embedded computing
- Leakage protection
- Automotive permanent magnet synchronous motors
- Transformer load monitoring equipment
- Power distribution systems of ICU
- Electric heating appliances
- Electrical fire monitoring system
- Medical-specific isolation transformer
