MAX6732AUTYDD3+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. Please find attached SOT-23-6 functions for your reference in this IC power. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 2. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 6 pins on the board. There are 6 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C . Power management has an output of Open Drain or Open Collector during operation. The supervisor's supply current is specified to 15μA. It is always advisable to use MAX6732A, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 1/5V watts is required for the operation of this power management.
MAX6732AUTYDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6732AUTYDD3+T Applications
There are a lot of Maxim Integrated MAX6732AUTYDD3+T Voltage Supervisors applications.
- Battery cars
- Kitchen appliances
- Cloud computing
- DC stabilized power supply module
- Power communication system
- Smart meter
- Battery cars
- Leakage current detection
- Military electronics
- Smartphones
