MAX6732AUTSHD3+T Overview
It is mounted through 6 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SOT-23-6 functions for you to refer to. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 2 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 6. The pins of the power management system count 6. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C. Power management has an output of Open Drain or Open Collector during operation. The power management's supply current is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6732A, which is the base power ics number. The voltage supervisor requires a power source of 1/5V volts in order to work correctly.
MAX6732AUTSHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6732AUTSHD3+T Applications
There are a lot of Maxim Integrated MAX6732AUTSHD3+T Voltage Supervisors applications.
- Leakage current detection
- Power distribution systems of operating room
- Battery cars
- Radio
- Insulation fault location system
- Dash board
- Detection of phase sequence
- Important electronics for automotive protection
- FPGA design
- Analog circuit
