MAX6731AUTLD3+ Overview
This power management consists of 6 mounting terminals on which it can be mounted. There are SOT-23-6 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 225. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. 6 pins make up the power management. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. A maximum supply temperature of 39μA can be used with this power management.
MAX6731AUTLD3+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
MAX6731AUTLD3+ Applications
There are a lot of Maxim Integrated MAX6731AUTLD3+ Voltage Supervisors applications.
- Detection of phase sequence
- Digitally controlled LDO regulators circuit
- Smart meter
- Set top box
- Rechargeable batteries
- Automotive permanent magnet synchronous motors
- Power communication system
- Medical-specific isolation transformer
- Computer applications
- Telecommunications equipment
