MAX6730AUTTD3+T Overview
A total of 6 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. It has a total of 6 pins that are attached to IC management. Power managment ic pin count is 6. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supply current of the power management is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6730, which is the base power ics number.
MAX6730AUTTD3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6730AUTTD3+T Applications
There are a lot of Maxim Integrated MAX6730AUTTD3+T Voltage Supervisors applications.
- Battery-powered equipment
- Satellite navigation
- DVR
- FPGA design
- Telecommunications equipment
- Low voltage/high power - AI, GPU
- Display equipment
- Refrigeration
- Military electronics
- Detection of phase sequence
