MAX6729KAZWD3+T Overview
A total of 8 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 3 channels. There are SOT-23-8 functions included in this PMIC so that you can refer to them. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3 is applied to the power ic, it conducts. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. A total of 8 pins are located on this power management. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C degrees. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 15μA volt supply current. You can always use MAX6729, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 1/5V volts of power.
MAX6729KAZWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6729KAZWD3+T Applications
There are a lot of Maxim Integrated MAX6729KAZWD3+T Voltage Supervisors applications.
- Kitchen appliances
- Functional modules
- Solar power charger
- Medical-specific insulation monitor
- Household appliances
- Microprocessor system
- Power distribution systems of operating room
- Personal computers
- Display equipment
- Important electronics for automotive protection
