MAX6729AKAVHD3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 3 channels that can be found. As a reference, this IC power includes SOT-23-8 functions for your convenience. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3 is used to conduct the PMIC chip. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 8 pins on power management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 15μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6729A, the base power ics number. The voltage supervisor requires a power source of 1/5V volts in order to work correctly.
MAX6729AKAVHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6729AKAVHD3+T Applications
There are a lot of Maxim Integrated MAX6729AKAVHD3+T Voltage Supervisors applications.
- Multi-voltage system
- Leakage protection
- Battery cars
- Automotive permanent magnet synchronous motors
- Leakage current detection
- Smartphones
- Electronics installed in the vehicle
- Smart meter
- Dash board
- Satellite navigation
