MAX6726AKASHD3+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. There are a total of 3 channels on this supervisor, and they are arranged in a series. Please refer to power management for SOT-23-8 functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 3. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 8. This power management system has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. For this power management, there is an 15μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX6726A. In order to operate this power management, it requires 1/5V volts of power.
MAX6726AKASHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6726AKASHD3+T Applications
There are a lot of Maxim Integrated MAX6726AKASHD3+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- External alarm
- Set top box
- Computer applications
- Power distribution systems of ICU
- Battery cars
- Important electronics for automotive protection
- Detection of phase sequence
- Automotive power systems
- Insulation fault location system
