MAX6725KASHD3+T Overview
Power management is mounted through 8 terminals. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. This power managment ic consists of 3 channels, each of which can be used independently. Please find attached SOT-23-8 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 3 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. Power managment ic pin count is 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. There is an output voltage of Open Drain, Open Drain from this supervisor when it is operating. For this power management, there is an 15μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX6725, the base PMIC number. In order to operate this power management, it requires 1/5V volts of power.
MAX6725KASHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6725KASHD3+T Applications
There are a lot of Maxim Integrated MAX6725KASHD3+T Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Network equipment
- Multi-voltage system
- Digitally controlled LDO regulators circuit
- Smartphones
- Military communications
- Dash board
- Set top box
- Personal computers
- Consumer electronics
