MAX6724AUTYHD3+T Overview
Power management is mounted through 6 terminals. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 3 channels that can be found. IC management is packaged as a SOT-23-6 package. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. In a 3 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 6 pins that are attached to IC management. This power management system has 6 pins. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~125°C. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 15μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6724A, the base power ics number. To operate this power management, you will need at least 1/5V volts of power.
MAX6724AUTYHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6724AUTYHD3+T Applications
There are a lot of Maxim Integrated MAX6724AUTYHD3+T Voltage Supervisors applications.
- Important electronics for automotive protection
- Medical-specific isolation transformer
- Microprocessor system
- Automotive power systems
- Power distribution systems of infant care room
- Detection of phase imbalance
- Digitally controlled LDO regulators circuit
- Computer applications
- Telecommunications equipment
- DSP
