MAX6722UTTGD3 Overview
A total of 6 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Cut Tape. Please refer to this PMIC for 1 functions. There are a total of 2 channels on this supervisor, and they are arranged in a series. Please refer to power management for SOT-23 functions. During the reflow process, a peak temperature of 260 is specified for the package. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 6 pins on power management. Power managment ic pin count is 6. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In addition, IC management are other features such as [0], to mention only a few. There are also other types of integrated circuits included in the supervisor, like POWER SUPPLY MANAGEMENT CIRCUIT. It is necessary to have 1/5V volts of power in order for this voltage supervisor to operate.
MAX6722UTTGD3 Features
Minimum supply voltage of 800mV
MAX6722UTTGD3 Applications
There are a lot of Maxim Integrated
MAX6722UTTGD3 Voltage Supervisors applications.
- Power distribution systems of ICU
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
