MAX6722AUTTZD3+T Overview
Power management is mounted through 6 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. This power management is made up of 2 channels which are available in a series format. Please refer to power management for SOT-23-6 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 2-voltage supply. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. There are a total of 6 pins on power management. There are 6 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~125°C. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 15μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6722A, the base power ics number. In order to operate this power management, it requires 1/5V volts of power.
MAX6722AUTTZD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6722AUTTZD3+T Applications
There are a lot of Maxim Integrated MAX6722AUTTZD3+T Voltage Supervisors applications.
- Important electronics for automotive safety
- Battery cars
- DC stabilized power supply module
- Automotive permanent magnet synchronous motors
- Power distribution systems of CCU
- Unattended substation automation
- emergency room
- DSP
- Precision measurement
- Leakage current detection
