MAX6722AUTSDD3+ Overview
This power management consists of 6 mounting terminals on which it can be mounted. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 3 channels. Please refer to power management for SOT-23-6 functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power ics operate at 2 supply voltages. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 6. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~125°C TA degrees. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. To operate this power management, you will need at least 1/5V volts of power.
MAX6722AUTSDD3+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
MAX6722AUTSDD3+ Applications
There are a lot of Maxim Integrated MAX6722AUTSDD3+ Voltage Supervisors applications.
- DVR
- Dash board
- Detection of phase sequence
- Microcontroller system
- Low voltage/high power - AI, GPU
- FPGA design
- Display equipment
- Data storage applications
- Medical-specific isolation transformer
- Automotive power systems
