MAX6722AUTRVD3+T Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 2 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find SOT-23-6 functions for your reference. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 2. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 6 pins on the board. Power managment ic pin count is 6. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX6722A, the base power ics number. The power management must be powered by 1/5V volts to function properly.
MAX6722AUTRVD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6722AUTRVD3+T Applications
There are a lot of Maxim Integrated MAX6722AUTRVD3+T Voltage Supervisors applications.
- Data storage applications
- Multi-voltage system
- Digitally controlled LDO regulators circuit
- Electrical fire monitoring system
- DVR
- Detection of phase loss
- Battery cars
- Power distribution systems of operating room
- Linux and server computing
- Battery cars
