MAX6721UTZGD3+ Overview
There are 6 terminals on this power management that allow it to be mounted. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 2 channels. IC management is packaged as a SOT-23-6 package. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. A total of 6 pins are located on this power management. The pins of the power management system count 6. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a requirement for 1/5V power to power this power management.
MAX6721UTZGD3+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
MAX6721UTZGD3+ Applications
There are a lot of Maxim Integrated MAX6721UTZGD3+ Voltage Supervisors applications.
- FPGA design
- Network equipment
- Multi-voltage system
- Detection of phase sequence
- Set top box
- Detection of phase loss
- Data storage applications
- Kitchen appliances
- Battery cars
- Leakage protection
