MAX6721AUTYHD3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. This power management is made up of 2 channels which are available in a series format. For your reference, this PMIC includes a list of SOT-23-6 functions. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power ics operate at 2 supply voltages. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. There are 6 pins on the supervisor. IC management can only work with a supply voltage of 800mV volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 15μA volt supply current. It is always advisable to use MAX6721A, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 1/5V power to power this power management.
MAX6721AUTYHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6721AUTYHD3+T Applications
There are a lot of Maxim Integrated MAX6721AUTYHD3+T Voltage Supervisors applications.
- Radar
- Data storage applications
- Stable power system
- Military communications
- DVR
- Electronics installed in the vehicle
- Low voltage/high power - AI, GPU
- External alarm
- Urban rail transit weak current power monitoring
- Smartphones
