MAX6721AUTWGD3+T Overview
A total of 6 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. In this IC management you will find SOT-23-6 functions for you to refer to. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. Power ics operate at 2 supply voltages. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 6 pins on the board. The pins of the power management system count 6. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~125°C TA . During operation, this power management system outputs Open Drain or Open Collector. There is a supply current of 15μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX6721. The power management must be powered by 1/5V volts to function properly.
MAX6721AUTWGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6721AUTWGD3+T Applications
There are a lot of Maxim Integrated MAX6721AUTWGD3+T Voltage Supervisors applications.
- Battery-powered equipment
- Analog circuit
- Battery cars
- Radio
- FPGA design
- Utility meter
- Leakage current detection
- Important electronics for automotive protection
- Radar
- Cloud computing
