MAX6721AUTSVD3+T Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 2 channels. For your reference, this PMIC includes a list of SOT-23-6 functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 2 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 6 pins are located on this power management. There are 6 pins on the supervisor. It is recommended that Vsup should not be less than 800mV for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. There is a 15μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to MAX6721, the base PMIC number. To operate this power management, you will need at least 1/5V volts of power.
MAX6721AUTSVD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6721AUTSVD3+T Applications
There are a lot of Maxim Integrated MAX6721AUTSVD3+T Voltage Supervisors applications.
- emergency room
- Power communication system
- Personal computers
- External alarm
- Utility meter
- Power distribution systems of CCU
- Radar
- Display equipment
- Detection of phase sequence
- Consumer electronics
