MAX6720AUTTWD3+T Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 3 channels, each of which can be used independently. IC management is packaged as a SOT-23-6 package. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 1V is applied to the power ic, it conducts. In a 3 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 6 pins. 6 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 15μA. It is always advisable to use MAX6720A, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 1/5V volts of power.
MAX6720AUTTWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6720AUTTWD3+T Applications
There are a lot of Maxim Integrated MAX6720AUTTWD3+T Voltage Supervisors applications.
- Display equipment
- Cloud computing
- Battery cars
- Smart meter
- Analog circuit
- Dash board
- Electric heating appliances
- Leakage protection
- Rechargeable batteries
- Electronics installed in the vehicle
