MAX6719AUTSHD3+T Overview
Power management is mounted through 6 terminals. In terms of packaging, power management follows the Strip model. Power management is possible to find a series of 1 functions. A series of 3 channels can be found on this supervisor. For your reference, this PMIC includes a list of SOT-23-6 functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 1V. Power ics operate at 3 supply voltages. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 6 pins in it. Power managment ic pin count is 6. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The supply current of the power management is 15μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. A power supply of 1/5V watts is required for the operation of this power management.
MAX6719AUTSHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6719AUTSHD3+T Applications
There are a lot of Maxim Integrated MAX6719AUTSHD3+T Voltage Supervisors applications.
- Battery-powered equipment
- Detection of phase imbalance
- Power communication system
- Set top box
- Consumer electronics
- Power distribution systems of infant care room
- Transformer load monitoring equipment
- Refrigeration
- Household appliances
- Efficient information transmission
