MAX6718UKZWD3+T Overview
There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 2 channels. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. Power management conducts at a voltage of 2. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. It is recommended that Vsup should not be less than 800mV for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX6718, the base power ics number.
MAX6718UKZWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6718UKZWD3+T Applications
There are a lot of Maxim Integrated MAX6718UKZWD3+T Voltage Supervisors applications.
- Battery cars
- Medical-specific insulation monitor
- Display equipment
- Microcontroller system
- Medical-specific isolation transformer
- Set top box
- Computer applications
- Fire equipment power monitoring system
- Detection of phase loss
- emergency room
