MAX6718UKLTD3+T Overview
As you can see, this power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 2 channels that can be found. To assist you, this PMIC includes SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. There is a specification for the peak reflow temperature of the package to be 260. Power ics operate at 2 supply voltages. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. This power management has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 15μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6718, which is the base power ics number.
MAX6718UKLTD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6718UKLTD3+T Applications
There are a lot of Maxim Integrated MAX6718UKLTD3+T Voltage Supervisors applications.
- Transformer load monitoring equipment
- Power distribution systems of operating room
- Leakage current detection
- Radio
- Power distribution systems of infant care room
- Sensitive sensors
- Battery cars
- Leakage protection
- Unattended substation automation
- FPGA design
