Name: MAX6718AUKVDD3+T
Brand: Maxim Integrated
SKU: MAX6718AUKVDD3+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Published	2008
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Type	Multi-Voltage Supervisor
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	571mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.15V
Base Part Number	MAX6718A
Output	Push-Pull, Totem Pole
Pin Count	5
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	800mV
Operating Supply Current	15μA
Adjustable Threshold	YES
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	0.788V 1.575V
Number of Voltages Monitored	2
Reset Timeout	140ms Minimum
Supply Current-Max (Isup)	0.039mA
Undervoltage Threshold	765mV
Overvoltage Threshold	810mV
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX6718AUKVDD3+T Product Details

MAX6718AUKVDD3+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. A series of 2 channels can be found on this supervisor. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 3.15V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 2. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. 5 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6718A, which is the base power ics number.