MAX6717AUKVDD2+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 2 channels. IC management is packaged as a SC-74A, SOT-753 package. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3.15V volt supply. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 5. Power managment ic pin count is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The power management's supply current is 15μA. For similar manage ics search of the manufacturer, you can always refer to MAX6717A, the base PMIC number.
MAX6717AUKVDD2+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6717AUKVDD2+T Applications
There are a lot of Maxim Integrated MAX6717AUKVDD2+T Voltage Supervisors applications.
- Detection of phase sequence
- Dash board
- Electrical fire monitoring system
- Leakage current detection
- Leakage protection
- Urban rail transit weak current power monitoring
- Detection of phase loss
- Transformer load monitoring equipment
- Smart meter
- Power distribution systems of infant care room