MAX6717AUKRVD3+T Overview
A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 2 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.15V. When 2 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. 5 pins are present in total in this power management. Pin count of the power management is 5. It is recommended that Vsup should not be less than 800mV for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX6717A, the base power ics number.
MAX6717AUKRVD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6717AUKRVD3+T Applications
There are a lot of Maxim Integrated MAX6717AUKRVD3+T Voltage Supervisors applications.
- Precision measurement
- Sensitive sensors
- Magnetic resonance imaging
- Household appliances
- Detection of phase sequence
- Rechargeable batteries
- Cloud computing
- Analog circuit
- Radio
- Dash board
