MAX6715UTSHD3+T Overview
Power management is mounted through 6 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 2 channels that can be found. As a reference, this IC power includes SOT-23-6 functions for your convenience. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. There are a total of 6 pins on power management. 6 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. This power management requires 1/5V power to work.
MAX6715UTSHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6715UTSHD3+T Applications
There are a lot of Maxim Integrated MAX6715UTSHD3+T Voltage Supervisors applications.
- Leakage protection
- Important electronics for automotive protection
- Important electronics for automotive safety
- Detection of phase imbalance
- Solar power charger
- Radar
- Power distribution systems of infant care room
- Computer applications
- Radio
- Electronics installed in the vehicle
