MAX6714AUB+T Overview
There are 10 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 4 channels that can be found. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When 4 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 10. Power managment ic pin count is 10. It is recommended that Vsup should not be less than 2V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 80μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX6714. The power management must be powered by 2.5/5V volts to function properly.
MAX6714AUB+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
80μA operating supply current
MAX6714AUB+T Applications
There are a lot of Maxim Integrated MAX6714AUB+T Voltage Supervisors applications.
- Set top box
- DVR
- Linux and server computing
- Multi-voltage system
- Cloud computing
- Medical-specific isolation transformer
- Dash board
- Leakage current detection
- Network equipment
- Satellite navigation
