MAX6706AMKA+T Overview
It is mounted through 8 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. There are SOT-23-8 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 2 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. 8 pins are present in total in this power management. There are 8 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~125°C . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 12μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6706, the base power ics number.
MAX6706AMKA+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.2V
12μA operating supply current
MAX6706AMKA+T Applications
There are a lot of Maxim Integrated MAX6706AMKA+T Voltage Supervisors applications.
- Refrigeration
- Sensitive sensors
- Electronics installed in the vehicle
- Radio
- Battery-powered equipment
- Radar
- Military electronics
- Microcontroller system
- Utility meter
- Urban rail transit weak current power monitoring
