MAX6701LKA+T Overview
As you can see, this power management is mounted through 8 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find SOT-23-8 functions for you to refer to. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 5V. When 3 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 8 pins. The pins of the power management system count 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 12μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MAX6701. A power supply of 5V watts is required for the operation of this power management.
MAX6701LKA+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.2V
12μA operating supply current
MAX6701LKA+T Applications
There are a lot of Maxim Integrated MAX6701LKA+T Voltage Supervisors applications.
- Medical-specific isolation transformer
- Battery-powered equipment
- Detection of phase imbalance
- Rechargeable batteries
- Computer applications
- WiFi router
- Insulation fault location system
- Leakage current detection
- Consumer electronics
- Low voltage/high power - AI, GPU
